RC/TORQUE
HOUSE
Torquehouse /READING PATH 03

Tune with purpose

Make the car consistent first. Then change one variable and keep an honest account of the result.

  1. 01
    3 MIN READ

    Center a servo and set endpoints without forcing the steering

    Establish centre and safe travel.

  2. 02
    3 MIN READ

    Measure ride height and droop from a repeatable starting point

    Define how your measurements are made.

  3. 03
    3 MIN READ

    Set a camber and toe baseline before interpreting handling

    Check geometry without tuning around damage.

  4. 04
    3 MIN READ

    Set pinion-to-spur mesh as a repeatable check

    Separate gear contact from gear ratio.

  5. 05
    3 MIN READ

    Did that setup change help? Run an A/B/A comparison

    Compare a change, then return to the baseline.